×

Recent Searches

Tags

Power Pack Scissor Lift Table - HSLTB Scissor Lift Table Hydraulic Power Pack

Unit Feature:
- Power pack scissor lift table HSLTB series as hydraulic power source
- 220/380VAC motor voltage with 2.2Kw and 3.0Kw power
- Oil tank volume from 12L~25L, or other dimension as custom

Max. Operating Pressure:
Up to 180bar optional

Flow Range:
2.5ml/r. ; 3.2ml/r. ; 3.7ml/r. ; 4.2ml/r. optional; 5.0ml/r. optional

Electric Motor Power:
2.2KW ; 3.0KW optional

Reservoir Capacity & Configurations:
12L; 14L; 16L; 20L; 25L optional, check the chart below
Horizontal position installation

Power pack scissor lift table HSLTB series is the hydraulic for scissor lift table, the oil in power pack should be clean enough and every period should replace the oil fluid and maintain the power pack.

Remove the hydraulic tank filler cap, filter cover, detection hole, hydraulic oil pipe and other parts of hydraulic power pack, resulting in the system to avoid dust exposure, remove the parts should be thoroughly cleaned before opening. Such as removing hydraulic tank filler cap, first except to the tank cover around the earth and unscrew fuel tank cover, remove the residual at the junction of the debris (wash water to prevent water infiltration tank), confirming the cleaning before opening the tank cap. For the use of wiping material and the hammer, should choose not to drop a fiber impurity wiping material and the impact surface adhesion rubber special hammer. Hydraulic components, hydraulic hose to wash, with high pressure air drying after assembly.

Selection of packaging intact authentic filter when changing the oil and filter cleaning and installation of the filter before the application of wiping material carefully cleaning the filter shell bottom dirt. Cleaning oil must use the system with the same brand of hydraulic oil, oil temperature between 45 to 80℃, high flow rate as far as possible take away impurities in the system. Hydraulic power pack to be clean repeatedly more than three times, after each cleaning, take advantage of the oil heat will be released all the system. Clean the filter, replace the new filter cartridge after filling the new oil.

Ordering Code:

Normal Ordering Code: HSLTB-220V-12L-2.5C-180B-2.2 *
Explanation below:

HSLTB
-220V
-12L
-2.5C -180B -2.2
*
(1) (2) (3) (4) (5) (6) (7)

(1) Hydraulic Power Pack=HSLTB
(2) Motor Voltage: 220VAC, 380VAC
(3) Oil Reservoir Volume: 12L, 14L, 16L, 20L, 25L
(4) Pump Displacement: 2.5ml/r; 3.2ml/r; 3.7ml/r; 3.7ml/r; 4.2ml/r; 5ml/r
(5) Max. Pressure: 12MPa(120bar) ;  14MPa(140bar) ;  15MPa(150bar); 16MPa(160bar); 18MPa(180bar)
(6) Electric Motor Power: 2.2KW, 3.0KW
(7) * :  Further Information
(Check the chart below)
Note: For more information, please check the chart below

Function Symbol :

Technical Data And Dimensions:

Model Motor Volt Motor power Rated Speed Displacement System pressure Tank Volume L(mm)
HSLTB-220V-12L-2.5C-180B-2.2 220VAC 2.2KW 2800rpm 2.5mL/r 18MPa 12L 677
HSLTB-220V-14L-3.2C-140B-2.2 220VAC 2.2KW 2800rpm 3.2mL/r 14MPa 14L 727
HSLTB-220V-16L-3.7C-120B-2.2 220VAC 2.2KW 2800rpm 3.7mL/r 12MPa 16L 777
HSLTB-380V-16L-3.7C-160B-3.0 380VAC 3KW 2800rpm 3.7mL/r 16MPa 16L 777
HSLTB-380V-20L-4.2C-150B-3.0 380VAC 3KW 2800rpm 4.2mL/r 15MPa 20L 877
HSLTB-380V-25L-5.0C-120B-3.0 380VAC 3KW 2800rpm 5mL/r 12MPa 25L 1002

TOP