Electro Power Pack Scissor Lift Table - HSLTC Electro Hydraulic Power Unit For Scissor Lift Table

Unit Feature:
- Electro power pack scissor lift table as hydraulic power source
- 220/380VAC motor voltage with 1.5Kw and 2.2Kw power
- Oil tank volume from 6L~12L, or other dimension as custom

Max. Operating Pressure:
Up to 120bar~200bar optional

Flow Range:
1.6ml/r; 2.1ml/r. ; 2.5ml/r. ; 2.7ml/r. optional

Electric Motor Power:
2.2KW ; 1.5KW optional

Reservoir Capacity & Configurations:
6L; 8L; 10L; 12L optional, check the chart below
Horizontal position installation

Electro power pack scissor lift table HSLTC series is designed for scissor lift table as the source of electro hydraulic power unit. In the atmospheric pressure at normal temperature, the volume ratio of 6 to 8% of the air, when the pressure in electro power pack to reduce space gas will be free from the oil, bubble burst to make the hydraulic components "cavitation", resulting in noise. A large amount of air into the oil will make the "cavitation" phenomenon in electro power pack, hydraulic oil compressibility will increase, the work is not stable, reduce work efficiency, the implementation of hydraulic components such as "crawling" and other adverse consequences. In addition, the air will also make the hydraulic oil oxidation, accelerate the deterioration of oil. To prevent air intrusion in electro power pack scissor lift table HSLTC series should pay attention to the following points:

  1. Repair and change to the exclusion of the air in the system to normal operation.
  2. Hydraulic pump shall not be exposed out of the oil surface, oil pipeline must be sealed well.
  3.  The oil pump drive shaft seal should be good, attention should be paid to replace the seal should use "lips" authentic seal, can not use "single lip instead of" oil seal, because single lip seal only one-way sealing oil, does not have the function of sealing gas.

Ordering Code:

Normal Ordering Code: HSLTC-220V-6L-1.6C-200B-1.5 *
Explanation below:

-1.6C -200B -1.5
(1) (2) (3) (4) (5) (6) (7)

(1) Hydraulic Power Pack=HSLTC
(2) Motor Voltage: 220VAC, 380VAC
(3) Oil Reservoir Volume: 6L, 8L, 10L, 12L
(4) Pump Displacement: 1.6ml/r; 2.1ml/r; 2.5ml/r; 2.7ml/r
(5) Max. Pressure:  20MPa(200bar)
(6) Electric Motor Power: 1.5KW, 2.2KW
(7) * :  Further Information
(Check the chart below)
Note: For more information, please check the chart below

Function Symbol :

Technical Data And Dimensions:

Model Motor Volt Motor power Rated Speed Displacement System pressure Tank Volume L(mm)
HSLTC-220V-6L-1.6C-200B-1.5 220VAC 1.5KW 2800 RPM 1.6mL/r 20MPa 6L 629
HSLTC-220V-6L-2.1C-160B-1.5 220VAC 1.5KW 2800 RPM 2.1mL/r 16MPa 6L 629
HSLTC-220V-8L-2.5C-120B-1.5 220VAC 1.5KW 2800 RPM 2.5mL/r 12MPa 8L 699
HSLTC-380V-8L-2.1C-200B-2.2 380VAC 2.2KW 2800 RPM 2.1mL/r 20MPa 8L 699
HSLTC-380V-10L-2.5C-160B-2.2 380VAC 2.2KW 2800 RPM 2.5mL/r 16MPa 10L 769
HSLTC-380V-12L-2.7C-150B-2.2 380VAC 2.2KW 2800 RPM 2.7mL/r 15MPa 12L 869