×

Recent Searches

Tags

Electric Hydraulic Power Unit -HSSD Series Standard Electric Hydraulic Power Unit

Unit Feature:
- High pressure operation up to 800bar
- Powerful electric motor equipped with high quality
- Oil tank volume from 30L to 300L optional

Max. Operating Pressure:
To 320bar, 400bar, 630bar, 800bar optional

Flow Range:
0.8L/min.~ 63L/min. optional, check the chart below

Electric Motor Power:
1.5KW ~ 7.5KW optional, check the chart below

Reservoir Capacity & Configurations:
30L ~ 300L optional, check the chart below
Vertical power position unit

Oil Reservoir Color:
Blue, Yellow, Black, Orange, Black Or Custom

HSSD series ultra-high pressure electric hydraulic pump which is a single outlet, high and low pressure pump with parallel oil circuit hydraulic power unit. Electric hydraulic power unit will supply the low and high pressure while the pump operation, obtaining a large output flow, the return oil will flow back automatically to oil tank.

HSSD electric hydraulic power unit lower the consumption of motor power, reduce oil heating, with function of holding pressure while stopping, single oi channel with inlet and return oil performance.

The features of HSSD Electric Hydraulic Power Unit:
1. Only for hydraulic oil as medium
2. Hydraulic oil storage capacity must be within the scope of the oil window
3. 80 mesh filter must be used while changing the oil, the oil tank should be clean and six months as oil replace period
4. Better oil operation temperature is 10 degrees Celsius to 50 degrees Celsius
5. Open the air nut before starting the electric pump and turn the switch in the unloading position
6. Electric motor temperature is too high while the use of the process, stop the electric hydraulic power unit until its cooling to normal temperature
7. The pump of electric hydraulic power unit has been adjusted before delivery, random adjustment is not allowed, it must be carried out by virtue of the pressure meter
8. High pressure oil pipe through 105MPA tested experiment before leaving our factory. However, due to the simple aging hose, so users need to often view, usually for six months, frequently used for three months, when under 87.5MPA pressure test, such as damaged, raised to gibbous, leakage of host which should be replaced
9. Bearings are usually cleaned once six months, the need to addition grease while the installation

Ordering Code:

Normal Ordering Code: HSSD 0.8/6/1.5/35
Explanation below:

HSSD
0.8 /
4
/
1.5
/ 30
*
(1) (2) (3) (4) (5) (6)

(1) Hydraulic Power Unit Code=HSSD
(2) Fluid Flow Rate At High Pressure: 0.8L/min ~ 13L/min(Check the chart below)
(3) Fluid Flow Rate At Low Pressure: 4L/min ~ 63L/min(Check the chart below)
(4) Motor Power:1.5Kw~7.5Kw(Check the chart below)
(5) Oil Tank Volume: 30L= 300L
(6) Further Information

Function Symbol :

Technical Data:

Nos. Code Max. Pre.(Mpa) Flow At High Pre.(L/min) Min.Pre.(Mpa) Flow At Low Pre.(L/min) Motor
(KW)
Tank
(L)
1 HSSD0.8,1.0,

1.2/4,6,10

80 0.8、1.0、1.2 2.5 4、6、10 1.5 30
40
60
2 HSSD1.8,2.0/4

6,10

80 1.8、2.0 2.5 4、6、10 3 40
60
3 HSSD1.8,2.0/16,

20,25,32

80 1.8、2.0 2.5 16、20、25、32 3 60
80
120
4 HSSD3.0/4,6,10 80 3.0 2.5 4、6、10 4 40
60
5 HSSD3.0/16,20

25,32

80 3.0 2.5 16、20、25、32 4 60
80
120
6 HSSD3.4,4.0/16

20,25,32

80 3.4、4.0 2.5 4、6、10 5.5 40
60
7 HSSD3.4,4.0/16,

20,25,32

80 3.4、4.0 2.5 16、20、25、32 5.5 60
80
120
8 HSSD2.5,3.5/4,

6,10

80 2.5、3.5 2.5 4、6、10 4 40
60
9 HSSD2.5,3.5/16

20,25,32

63 2.5、3.6 2.5 16、20、25、32 4 80
120
10 HSSD5.5/10/16/

20/25/30

63 5.5 2.5 10、16、20、25、32 7.5 80
120
11 HSSD5.5/40,

50,63

63 5.5 2.5 40、50、63 7.5 120
200
12 HSSD9/40

50,63

40 9 2.5 40、50、63 7.5 120
200
13 HSSD9/80,100,125 40 9 1.5 80、100 7.5 300
14 HSSD13/40,50,63 32 13 2 40、50、63 7.5 200
300
15 HSSD13/80,100,125 32 13 1.5 40、50、63 7.5 300

Note:
1. Mark * Pre. = Pressure
2. HSSD hydrauilc unit equipped with low pressure of CB-B gear pump series, also use the series of of CBN, CBD gear pump, low pressure can be adjusted to 2-5 MPa, can use the type of gear pump has CBN-304, 306, 310, 316.CBD-E525, 532, 550 series as well.

TOP