Car lift hydraulic power unit HSPCB series is designed for the car lift machine design, it will control the car life to rise, gravity drop, with suitable for different voltage and frequency, the drop action is available for manual control, but also can be used as the power source of hydraulic forklift and fork lift.
- The AC motor of HSPCB series car lift hydraulic power unit can not operate continuously (1 minutes ON, 9 minutes OFF), can be repeated work.
- The car lift hydraulic power unit must ensure that the oil clean without any impurities from cylinder, oil pipe, fittings and other hydraulic components.
- Hydraulic oil viscosity should be 15 ~ 68CST, should be clean and free of impurities, recommended the use of N46 number of hydraulic oil.
- This hydraulic system is suitable for vertical installation.
- The amount of oil in the tank is sufficient should be checked when to start the operating system at first time.
- The hydraulic oil should be changed after using operation at first 100 hours, then the replacement of hydraulic oil every 3000 hours.
- For requirement of different flow, pressure, motor power and other system parameters, please consult us.
Normal Ordering Code: HSPCB-240V-12L-2.1C-200B-2.2 *
(1) Hydraulic Power Pack=HSPCA
(2) Motor Voltage: 115VAC, 190VAC,, 230VAC,
208VAC, 240VAC, 460VAC,
(3) Oil Reservoir Volume: 6L, 8L, 12L, 14L
(4) Pump Displacement: 0.8ml/r; 1.2ml/r; 2.1ml/r; 2.5ml/r, 4.2ml/r
(5) Max. Pressure: 17.5Mpa(175bar), 20Mpa(200bar)
(6) Electric Motor Power: 1.1KW, 2.2KW
(7) * : Further Information
(Check the chart below)
Note: For more information, please check the chart below